TABLE OF CONTENTS
(6) USING A PRECUT 24 INCH 1 ¼ X 1 ¼ INCH ANGLE SLOT, ATTACH A 2 X 2 X 30 INCH WOOD “FRONT STOP,” CENTERED W/ ANGLE SLOT USING 3 12 X 1 INCH WOOD SCREWS. THIS IS THE FRONT STOP THAT WILL BE USED TO LINE UP YOUR FRONT CASTERS TO THE RIGHT OR LEFT SIDE LINES DEPENDING ON WHETHER YOU NEED A RIGHT-HAND OR LEFT-HAND FENCING CONFIGURATION.
(7) LINE UP THE EXPOSED SIDE OF THE 2 X 2 X 30 INCH FRONT STOP TO THE RIGHT SIDE LINE W/ THE EDGE OF THE ANGLE SLOT PERPENDICULAR TO POINT B. FIND THE PRE-CUT ROUND HOLE CLOSEST TO THE SIDE EDGE OF THE ANGLE SLOT AND TRACE THE HOLE DIRECTLY ONTO THE PLYWOOD. DO THIS AT BOTH ENDS OF THE ANGLE SLOT. (THE DISTANCE BETWEEN THE TWO HOLES SHOULD BE APPROX. 21 INCHES.)